Everest Refrigeration EPBNWR2 Two Door Back Mount Sandwich Prep Table

The Everest Refrigeration EPBNWR2 is an Sandwich Prep Table with a Back Mounted Condensing Unit. The worktop on this refrigerator is constructed of 16 gauge stainless steel, while the interior and sides are also made of stainless steel. The rear and bottom are constructed of galvanized steel. The Blizzard R290 condensing unit is replaceable, doesn't require on-site brazing and features reverse fan motors which support condenser coil cleaning. The EPBNWR2 utilizes environmentally friendly refrigerant R290.

The defrost cycle is both time-initiated and temperature terminated, and uses a defrost heater. This product's evaporator coils are corrosion resistant. The condensate drain is self-maintaining, and will not require any external drains. In addition, the drain is energy efficient, it won't need any electric heaters either. Pressure relief devices allow for easy access to the interior after opening the door. The factory preset temperature is 35°F. Temperatures can range from 33°F to 54°F.

The door gasket is snap-in and magnetic. The high strength door handles are recessed. There are four 5" swivel casters, with locks on the front set. The self-closing adjustable torsion system offers a positive seal. Meanwhile, the interior features one epoxy-coated steel wire shelf per section. The cabinet and door are insulated with high-density polyurethane. The included NEMA 5-15P is pre-wired and ready to plug.

Blizzard R290 All-In-One Slide Out Cooling Cartridge was engineered with safety, speed, and convenience at its core. An industry first, the Blizzard R290 is a patented, fully detachable self-contained refrigeration cartridge. Speedy and convenient braze-less repairs eliminate the risk of R290 ignition.

Everest Refrigeration EPBNR2 Features

2 Self-Closing Solid Hinged Doors

Back Mounted Condensing Unit

Refrigerant: R290

Capacity: 16 Cubic Feet

Blizzard All-In-One Slide Out Cooling Cartridge

Top, Sides, and Interior Material: Stainless Steel (16 Gauge Worktop)

Bottom and Rear Material: Galvanized Steel

Multi-Function Digital Controller

2-1/2" Polyurethane Insulated Cabinet

(4) 5" Swivel Casters with Locks on front set

High Performance Condenser Fans

Foam Insulated Lid

Removable Cutting Board

Frame Heaters

Rounded Corners

Electronically Commutated (ECM) Fan Motors

Full-Length Air Duct System

Overheat Protection Alarm

Temperature Range: 33°F to 54°F

NEMA 5-15P

NSF Listed

ETL

Electric: 115v/60/1ph

Everest Refrigeration EPBNR2 Benefits

Plug is pre-wired and ready for use

Frame heaters prevent moisture buildup on exterior

Slide out cooling cartridge is quick, safe, and eliminates the risk of coolant ignition

Digital controller features an easy to read LED display

ECM motors achieve rapid cooling with less consumption

Rounded corners reduce hazards

Overall Dimensions:

Height: 38-1/2"

Width: 59-1/8"

Depth: 31-1/2"

Specification
Ship Weight 373 lbs
Manufacturer Everest Refrigeration
Model Number EPBNWR2
Manufacturer Part # EPBNWR2
Oversized Shipping No
Hazardous Material No
Top/Sides/Interior Material Stainless Steel
Bottom/Rear Material Galvanized Steel
Color Silver
Dimensions (W x D x H) 59-1/8" x 31-1/2" x 38-1/2"
Capacity 16 Cu. Ft.
Compressor Location Back Mounted
Number of Sections 2
Door Style Swing
Door Type Solid
Number of Doors 2
Number of Shelves 2
Top Rail Pan Capacity 1/6 x 16
Horsepower 1/3
Amps 2.5
Electrical 115v/60/1ph
Temperature Range 33° - 54°F
Factory Preset Temp 35°F
Cabinet Insulation Thickness 2.5"
Lid Insulation Thickness 0.5"
Refrigerant R290 Hydrocarbon
Refrigerant R290 Hydrocarbon
NSF Listed Yes
ETL Sanitation Yes